How to Measure Your Opening for a Custom Barn Door
Last updated: May 21, 2024 5:28 PM
Introduction
Brief overview of the importance of accurate measurements for a perfect fit.
Section 1: Measuring an Opening Without Trim
1. Gather Your Tools
Tape measure
Level (optional)
Notepad and pencil for notes
2. Measure the Width
Position the tape measure at the left edge of the opening.
Extend it to the right edge.
Record the measurement at the widest point.
pencil for notes
3. Measure the Height
Start at the top edge of the opening.
Measure straight down to the floor.
Record this measurement as well.
4. Check for Level
Use a level to ensure the top of the opening is straight.
Note any variations that may affect door installation.
5. Determine Door Size
- For optimal coverage, plan for the door to cover the opening by a total of 4-6 inches (2-3 inches on each side) and 1 inch on top to prevent visibility behind the door.
6. Final Notes
- Double-check measurements to ensure accuracy.
- Take note of any obstructions or unique features around the opening.
Section 2: Measuring an Opening With Trim
1. Gather Your Tools
Tape measure
Level (optional)
Notepad and pencil for notes
2. Measure the Width
Measure from the outer edge of the trim on the left side to the outer edge of the trim on the right side.
Record the measurement.
3. Measure the Height
Measure from the top edge of the trim down to the floor.
- Again, record this measurement.
4. Check for Level
Ensure the top of the trim is level using a spirit level.